This water-based, fast-dry paint was developed for use on your plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic and Clear finishes are available (finish varies by colour)
A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability)
14ml tin covers approx. 0.3m² depending on thickness of application
Brush straight from the tin or airbrush with a suitable thinner such as water. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part water.
1-2 hours 'hard dry', allow longer for Gloss and Metallic finishes.
Brushes: water when wet, cellulose when dry. Permanent once dry.